10KW on-grid wind turbine generator

1. low wind speed start working 2. hydraulic tower easy to installed 3. high quality

Small Wind Generators :

Parameter
Rated power(W)	10000
Rated voltage(DCV)	240
Rated current(DCA)	42
Rotor diameter(m)	8.0
Blade material	GFRP
Rotation direction	Clockwise
Start-up wind speed(m/s)	2.5
Rated wind speed(m/s)	10
Cut-out wind speed(m/s)	16
Survival wind speed(m/s)	45
Net weight(T)	1.0
Wind turbine type	Upwind
Rated Rotating speed(RPM)	180
Blades No.	3
Hydraulic tower height (m)	12
Yaw mechanism	Electrical
Annual yield(kwh)	24000
Yaw mode	Auto/manual
Efficiency	0.85
Wind turbine tilt-angle	6°
Protection mode	-Yaw -Hydraulic brake -Dumpload

UNIQUE FEATURES OF UNITRON MAKE WIND GENERATORS

1) SUPERIOR GRADE MAGNETS FOR LONG LIFE

2) HIGH GRADE STATOR LAMINATIONS FOR SUPERIOR PERFORMANCE

3) TRIPLE INSULATION PLUS DIATHON EPI COAT TO ENSURE RESISTANCE AGAINEST INCLEMENT WEATHER CONDITIONS TO PROTECT STATOR

4) RESIN CAST VACCUM IMPREGNATED STATOR COILS

5) UNIQUE CONFORMAL COAT / TREATMENT ON ALL PARTS

6) HIGH PERFORMANCE SEALED DUAL TRACK BALL BEARINGS FOR LONG LASTING AND SMOOTH PEROFRMANCE

7) STAINLESS STEEL YAW SHAFT SYSTEM WITH NON SLIP COPPER ALLOY RINGS

ALLOY COPPER BRUSH CONTACTS ON YAW BEARING ENSURE Nx360o YAW ROTATION FOR WIND GENERATOR,. NO LOCKING OF CABLES / UNWINDING OF CABLES ARE NEEDED.

8) TRUE ANGLE GOVERNING COMPLIMENTED BY CONTROLLER TO PREVENT OVERSPEEDING OF ROTOR

9) HIGH PERFORMANCE CARBON FIBRE COMPOSITE REINFORCED ROTOR BLADES TREATED WITH SPECIAL EPOXY RESINS AND HIGH GLOSS PU COAT

10) CAREFUL LAYERING TECHNIQUE COMPLIMENTED BY METICULOUSLY BALANCED LIGHT WEIGHT CARBON FIBER BLADES ENSURE SMOOTHEST OPERATION UNDER ALL CONDITIONS, THIS EXTENDS THE LIFE OF GENERATOR

11) HIGH EFFICIENCY LOW COG LOSS PERMANENT MAGNET RADIAL FLUX ALTERNATOR WITH EFFICIENCIES EXCEEDING 87 %.

12) UNIQUE ANGLE GOVERNING MECHANISM ENSURES HIGH POWER PRODUCTION EVEN BEYOND FURLING SPEEDS > 60KMPH WHERE, MOST COMPETITIVE MODELS THE POWER DROP IS SIGNIFICANT.

13) STABLE 18M TRIANGULAR LATTICE TOWERS CAN WITHSTAND WIND SPEEDS > 150KMPH. 18M IS MINIMUM HEIGHT RECOMMENDED.

14) FEATURE RICH ELECTRONIC MICRO-CONTROLLER FOR ENERGY MANAGEMENT, LOW END POWER BOOST MPP REGULATOR. ENSURES, EFFICIENT ENERGY TRANSFER, PROTECTION BY CONTINUOUS RPM MONITORING ETC.

10KW on-grid wind turbine generator